Xerox 6120 manual 0.0.0.0, Phaser, About the Control Panel, Yes/No

	SUBNET	Settings	0.0.0.0
	MASK
		Specify the subnet mask for the
		network. Use the Up, Down, Left, and
		Right keys to specify the value.
	ENABLE	Settings	YES/NO
	HTTP
		Specify whether or not HTTP is used.
		If YES is selected, the Web page
		provided to the printer by the built-in
		HTTP server is enabled.
		If NO is selected, the Web page cannot
		be used.
	ENABLE	Settings	YES/NO
	AUTO IP
		Select whether or not the IP address is
		automatically acquired when DHCP/
		BOOTP and PING, ARP are not
		functioning or when there is no
		response.
		If NO is selected, the IP address is not
		automatically acquired.
		If YES is selected, the IP address is
		automatically acquired.
IPX/SPX	FRAME	Settings	AUTO/802.2/802.3/
	TYPE		ETHER II/SNAP
		Specify the protocol used with
		NetWare.
ETHERTALK	NAME	Settings	Phaser 6120
		Specify the name of the printer for
		finding printers with Macintosh
		EtherTalk.
		The printer name can contain a
		maximum of 16 characters.
	NAME2	Settings	Automatically
			entered
		Specify the name of the printer for
		finding printers with Macintosh
		EtherTalk.
		The printer name can contain a
		maximum of 16 characters.

About the Control Panel 37