Xerox 6120 Operational Safety, Operational Guidelines, User Safety Summary 153, Printer Clearance

Operational Safety

Your printer and supplies were designed and tested to meet strict safety requirements. These include safety agency examination, approval, and compliance with established environmental standards.

Your attention to the following safety guidelines helps to ensure the continued, safe operation of your printer.

Printing Safety Guidelines

„Wait 10-15 seconds between turning the printer off and on.

„Keep hands, hair, neckties, etc., away from the exit and feed rollers.

„When the printer is printing:

„Do not remove the paper source tray that you selected in either the printer driver or control panel.

„Do not open the doors.

„Do not move the printer.

Operational Guidelines

„Do not block or cover the slots and openings on the printer. The printer may overheat without adequate ventilation.

„Do not place the printer near a heat source.

„Do not place the printer in direct sunlight to avoid exposing light-sensitive components when the doors are open.

„Do not place the printer in line with the cold air flow from an air conditioning system.

„Place the printer on a level, solid non-vibrating surface with adequate strength for the weight of the printer. It should be within 2° of horizontal with all four feet in solid contact with the surface. The base printer weight without any packaging materials is approximately 20.5 kg (45 lb.).

„For optimum performance, use the printer at elevations below 2,500 m (8,200 ft.).

Printer Clearance

Place the printer in an area where there is adequate space for ventilation, operation, and servicing. For information about the printer clearance, see “Getting Acquainted with Your Printer” on page 2.

User Safety Summary 153