Xerox 6120 manual Dual In-Line Memory Module DIMM, Installing a DIMM

Dual In-Line Memory Module (DIMM)

" You may need additional memory (DIMM) for complex graphics and for duplex printing.

A dual in-line memory module (or DIMM) is a compact circuit board with surface-mount memory chips.

Your printer comes with 128 MB SDRAM printer memory on board. However, you can upgrade to a maximum of 640 MB of RAM through the installation of an additional unbuffered SDRAM DIMM. Your printer comes with one free DIMM slot.

Installing a DIMM

CAUTION

It’s very important to protect the printer controller board and any associated circuit boards from electrostatic damage. Before performing this procedure, review the antistatic caution on Page 136. In addition, always handle circuit boards by the edges only.

1Turn off the printer and disconnect the power cord and interface cables.

" If the duplex unit is installed, remove it.

Dual In-Line Memory Module (DIMM) 137