Xerox 6120 Netzone, NETZONE2, Ethernet, AUTO/100 Full DUPLEX/100, BINARY/QUOTED Binary, Protocol

		NETZONE	Settings	Automatically
				entered
			Specify the Macintosh EtherTalk zone.
			The zone name can contain a
			maximum of 16 characters.
		NETZONE2	Settings	Automatically
				entered
			Specify the Macintosh EtherTalk zone.
			The zone name can contain a
			maximum of 16 characters.
	ETHERNET	Settings	AUTO/100 FULL DUPLEX/100
	SPEED		HALF DUPLEX/10 FULL
			DUPLEX/10 HALF DUPLEX
		Specify the transmission speed for the network and
		the transmission method for bi-directional
		transmission.
	PS	Settings	BINARY/QUOTED BINARY
	PROTOCOL
		Select whether PostScript jobs are received in the
		binary format or the quoted format.
USB SETUP	ENABLE	Settings	YES/NO
		If YES is selected, USB is enabled.
		If NO is selected, USB is disabled.
	JOB	Settings	0-60-999
	TIMEOUT
		Specify the length of time (in seconds) until the print
		job being received is timed out when USB is being
		used.
PARALLEL	JOB	Settings	0-30-999
SETUP	TIMEOUT
		Specify the length of time (in seconds) until the print
		job being received is timed out when Parallel is being
		used.
ACTIVE I/	Settings	ETHERNET/PARALLEL
F
	Specify the interface to be used.
	An Ethernet and parallel connection cannot be used at the
	same time.
RESET	Settings	YES/NO
CONN
	Resets all settings on the Connection Setup menu to
SETUP	factory defaults.

38 About the Control Panel