TECHNICAL SUPPORT
Frequently Asked Questions
Problem & Question
Power LED Is Not ON
No Plug & Play
Picture Is Fuzzy & Has
Ghosting Shadowing
Problem
Picture Bounces, Flickers
Or Wave Pattern Is
Present In The Picture
Monitor Is Stuck In Active
Missing one of the primary colors (RED, GREEN, or BLUE)
Screen image is not centered or sized properly
Possible Solutions
∙Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor.
∙In order for the Plug & Play feature of the monitor to work, you need a Plug & Play compatible computer & video card. Check with your computer manufacturer. Also check the monitor's video cable and make sure none of the pins are bent.
∙Make sure the AOC Monitor Drivers are installed (AOC Monitor Drivers are available at : http://www.aoc.com)
∙Adjust the Contrast and Brightness Controls.
∙Make sure you are not using an extension cable or switch box. We recommend plugging the monitor directly to the video card output connector on the back of your computer.
∙Move electrical devices that may cause electrical interference as far away from the monitor as possible.
∙Use the maximum refresh rate your monitor is capable of at the resolution your are using.
∙The Computer Power Switch should be in the ON position.
∙The Computer Video Card should be snugly seated in its slot.
∙Make sure the monitor's video cable is properly connected to the computer.
∙Inspect the monitor's video cable and make sure none of the pins are bent.
∙Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.
∙Inspect the monitor's video cable and make sure that none of the pins arebent.
∙Make sure the monitor's video cable is properly connected to the computer.
∙Adjust
- 28 -
