Cable Connections On Back of Monitor and Computer | AOC 831S

Attaching the Cables

Cable Connections On Back of Monitor and Computer

1.Power

3.Analog

Turn off your computer before performing the procedure below.

1.Connect the power cable to the AC port on the back of the monitor.

2.Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer's D-Sub port.

3.Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does not display an image, see Troubleshooting.

Attaching Wall Mounting Arm

Preparing to Install An Optional Wall Mounting Arm

- 6 -

Image 6

AOC 831S manual Cable Connections On Back of Monitor and Computer, Attaching Wall Mounting Arm

Contents

USER`S Guide 831S National Conventions PrefaceAbout This Guide Product Registration Safety Introduction HG Declaration Precautions Setup Adjusting Viewing AngleSetup the stand and base Cable Connections On Back of Monitor and Computer Attaching Wall Mounting ArmPage Click Settings Click Control Panel Using the MonitorSetting the Optimal Resolution Click Settings OSD Settings DCB AdjustmentWhat is DCB? How to use Color Boost? Texture How to use Picture Boost? DCR Adjustment What is DCR?How to Use DCR? DCR Demos Function Control Illustration DCR DDC-CI How to use i-Menu software LED Indicators Status LED Color Full Power ModeActive-off Mode Installation Remarks Image setup Color Temperature Color Boost Picture Boost Setting Extra Page Help Compatibility Windows ME Driver Installation GuideWindows Windows XP Windows Vista Frequently Asked Questions Possible SolutionsTechnical Support Specifications Product Information Preset Display Modes Pin AssignmentsFREQUENCYkHZ FREQUENCYHz Plug & Play DDC2B Feature Plug and PlayPin Number