Polaroid TDB-3000AR Identification of Controls, Connection to a TV, Front Panel 13 12 11 10 9

Identification of Controls

FRONT PANEL 131211 10 9 8

REAR PANEL

1 2 3 4

				4	5
1		2	3
1	POWER ON/OFF				10
2	PREVIOUS				11
3	NEXT				12
4	PLAY				13

5STOP

6 PAUSE

7 PICTURE CD INDICATOR LIGHT

8 CD INDICATOR LIGHT

9 DVD INDICATOR LIGHT

67

REMOTE SENSOR OPEN/CLOSE

POWER INDICATOR LIGHT DISC TRAY

5 6 7 8 9

1COMPOSITE VIDEO OUTPUT

2 ANALOG AUDIO OUTPUT R

3 ANALOG AUDIO OUTPUT L

4 DIGITAL AUDIO-COAXIAL OUTPUT

5 S-VIDEO OUTPUT

6 COMPONENT VIDEO OUTPUT Y

7 COMPONENT VIDEO OUTPUT Pb

8 COMPONENT VIDEO OUTPUT Pr

9 DIGITAL AUDIO-OPTICAL OUTPUT

Connection to a TV

When connecting YPbPr, do not connect S-Video simultaneously.

Connect the DVD video player with an optional S-Video cable if the TV has an S-Video input. Do not connect the yellow video cable if using the S-Video cable.

Component output terminals when connected to selected TVs and monitors will produce a higher quality picture playback. Depending on the selected TVs and monitors, the wording of the component input terminals may vary. If there are any fluctuations with the color played back, adjust the TV or monitor to achieve the best audio and /or picture.

BEST

BETTER

GOOD

NOTICE

•Refer to the manual of the connected TV.

•Turn off power and unplug both units before connecting.

•If you connect the DVD video player to a video cassette recorder (VCR), or TV/VCR combination, the playback picture will be distorted because all DVD players incorporate copyright protection circuitry by Macrovision®.

•Keep the DVD video player away from any tuner or radio to avoid any static or distorted sound interference from a broadcast.

•Due to the wide dynamic range of sound output of the DVD video player, adjust the volume of your receiver to a comfortable listening level to avoid any speaker damage.

6