ENGLISH
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
10.WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.
Product
disposal of this product. For further detailed information, please contact
the retailer where you purchased this product or the Polk Audio Importer/
Distributor in your country. A listing of Polk Audio Importer/Distributors can be found on the Polk Audio website www.polkaudio.com or by contacting
Polk Audio at 5601 Metro Drive, Baltimore, Maryland 21215,
WARNING: Listen Carefully
Polk Audio loudspeakers and subwoofers are capable of playing at extremely high volume levels, which could cause serious or permanent hearing damage. Polk Audio, Inc. accepts no liability for hearing loss, bodily injury or property damage resulting from the misuse of its products.
Keep these guidelines in mind and always use your own good judgment when controlling volume:
•You should limit prolonged exposure to volumes that exceed 85 decibels(dB).
For more about safe volume levels, go to the Occupational Health and Safety Administration (OSHA) guidelines at http://www.osha.gov/dts/ osta/otm/noise/standards_more.html
Take Inventory
Inside each speaker container, you should find the following:
1.One
2.One
3.Mounting Template
4.Owner’s Manual
5.Registration Card
Important Note: If anything is missing or damaged, or if your speaker fails to operate, notify Polk Audio Customer Support Services immediately at
Installation Recommendation For Optimum Performance
Important Note: Vanishing Series Loudspeakers are not magnetically shielded and should not be placed closer than 1' (30cm) from a CRT (tube) television or video monitor.
Important Note: You should have a thorough understanding of and adhere to all local building and fire codes. Also, you should be familiar with the area behind the wall or ceiling into which you plan to install your speakers. Always use wire that meets appropriate building and fire codes. Wiring is best performed by an experienced professional.
When installing your loudspeakers, be aware of the weight of your particular model and the sturdi- ness of the material into which you are installing the speakers. Be aware of any concealed studs, electrical wiring or plumbing in the wall or ceiling into which you are installing the speakers.
If you doubt that you possess the necessary skills or tools, consult your Polk Audio dealer or a professional installer.
Wire Recommendations |
|
(minimum recommended) |
|
Runs | Gauge |
Lengths up to 25' | 18 or 16 |
Lengths greater than 25' | 16 or 14 |
but less than 50' |
|
Lengths greater than 50' | 14 or 12 |
but less than 75' |
|
Lengths greater than 75' | 12 |
Important information Before you Install your LoudSpeakers
Wall Or Ceiling Surface Preparation
If you’re installing your Vanishing Series speaker into a heavily textured wall or ceiling (e.g. stucco or popcorn finish), you must prepare the wall surface immediately around the speaker cutout. Sanding and smoothing the wall or ceiling surface will ensure the speaker and grille both seat properly and flat to the surface.
Loudspeaker Installation
You will need:
•Pencil for marking the location of installation.
•Keyhole saw, utility knife or material- appropriate tool for cutting drywall or other wall material.
•Screwdriver, preferably powered, with Phillips Head bit.
•Power drill with appropriate bit
(optional, for starting wall cut).
Trace around the template.
Cut the hole with the appropriate tool.
Crossover Warning
Exercise extreme caution when installing this loudspeaker so you do not damage the crossover.
eyebolt |
Security Eyebolt
Your Vanishing Series
has an eyebolt on the back of the speaker that can be used for an extra measure of installation security. Follow standard building code installation procedures in your area.
2 | Polk Audio Customer Service: |
