Continued
3. While displaying the selected category, select the desired channel.
ENGLISH
Presetting channels |
| Preset search |
• You can store up to 30 preferred channels in the memory. | • In the XM mode, select the desired preset channel. |
1. Select the desired channel with preforming channel search, direct search or category search.
2. To memorize the channels, perform the steps 2 to 4 in "Manual presetting" procedure on page 39.
Displaying XM information
•You can display XM information such as channel name, artist name, song title and signal strength.
•In the XM mode,
�Note:
• If the information on artist name, song title or category is not available, it will not be displayed correctly.
�Signal strength display mode
• If the reception is poor, you can check the signal strength of the XM radio signal and adjust the position of the XM antenna until "GOOD" is displayed.
• Each time the DISPLAY button is pressed, the display mode changes as follows:
→Channel number/name → Artist name → Song title → Category
Volume ← Surround mode ← Input signal ← Signal strength("GOOD", "MARGINAL", "WEAK", "NO SIGNL") ←
�Error message and status
• If an operation takes longer than usual or an error occurs, one of the following messages may be displayed.
Message | Status |
ANTENNA | The XM antenna is not connected correctly. Check the antenna. |
UPDATING | The XM user encryption code is being updated. Please wait. |
NO SIGNL | The signal is too weak. Check the antenna connection and reposition it for the best reception. |
LOADING | This receiver is tuning or decoding audio or text data. Please wait. |
OFF AIR | The selected XM channel is not currently broadcasting. Select another channel. |
42