Universal Remote Controls
This universal remote control can operate not only this receiver but also most popular brands of audio and video components such as CD players, tape decks, TVs, cable boxes, VCRs, DVD players, satellite receivers, etc.
•To operate 7 components other than this receiver , you should enter the setup code for each component. (For details, refer to “USING FUNCTIONS OF REMOTE CONTROL” on page 20.)
•The numbered buttons on the remote control have different functions in different device modes. For details, refer to "FUNCTION TABLE of the NUMBERED BUTTONS" on the next page.
�About the transmission signal
This remote control can emit not only the infrared beams which the conventional remote control(inculding the ROOM 2 remote control) uses but also the RF(Radio Frequency) beams which are stronger than those.
To operate this receiver and other components, this remote control should emit the infrared beams.
To operate this receiver only from longer distance even if there are obstacles such as walls, furniture, etc. in the way, this remote control should emit the RF beams.
Therefore, depending on how to use this remote control, you should set the tansmission signal mode to "IR"(default value) or "RF". (For details, refer to "Changing the transmission signal" on page 28.)
�Notes :
•To receive the RF beams, you should connect the RF remote antenna to this receiver. (For details, refer to "CONNECTING RF REMOTE ANTENNA" on page 12.)
•If the transmission signal mode is set to "RF", this remote control cannot control other audio and video components.
17 |
ENGLISH
