Sherwood R-772 manual Connecting Audio Components, Connecting External Ins, English

R-772(A)2007.8.165:21PM페이지8

ENGLISH

3. CONNECTING AUDIO COMPONENTS

•For analog audio recording, the ROOM 2 OUT jacks can be connected

to audio recording equipment such as a tape deck, an MD recorder, etc. as shown beside.

4. CONNECTING EXTERNAL INS

•Use these jacks to connect the corresponding outputs of a DVD player or external decorder, etc. that has 6, 7 or 8 channel analog audio outputs.

•In case of 6 or 7 channel outputs, do not connect both of the SURROUND BACK L and R inputs or the SURROUND BACK R input of this unit. (For details, refer to the operating instructions of the component to be connected.)

5. CONNECTING XM (only for North America)

•Connect the XM terminal to the XM Mini-Tuner system (sold separately).

•Position the XM Mini-Tuner system near a south-facing window to receive the best signal.

When making connections, also refer to the operating instructions of the XM Mini-Tuner system.

•For the best reception, check the signal strength of the XM radio signal with using signal strength display mode, then adjust the position of the XM Mini-Tuner system until "GOOD" is displayed. (For details, refer to "Displaying XM information" on page 42.)

•To listen to XM Satellite Radio, refer to “XM Satellite Radio (only for North America)” on page 40.

8