ENGLISH
When selecting the NAME
•You can give names to the input sources other than tuner.
•Up to 7 characters can be entered for each name.
1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired input source, then press the ENTER button.
Example: When selecting the VIDEO 1
2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the NAME, then press the ENTER button.
• The first digit flickers.
3. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to select the desired digit.
• Then the selected digit will flicker.
4. Press the CURSOR UP(▲)/DOWN(▼) buttons to enter the desired character on the flickering digit.
•You can enter the desired among blank, A ~ Z, a ~ z, 0 ~ 9, (, ), �, +, , ,
5. Repeat the above steps 3 and 4 to enter the desired characters on the rest of the digits.
6. Confirm your entry.
• The name is stored in the memory.
■To resume its factory input source name.
•Make a blank on each digit and press the ENTER button.
56
