When CD, AUX, VIDEO 1~ 4 is selected as an input source
•If the AUDIO MODE is set to the mode other than "DIGITAL" for the corresponding input source on the INPUT SETUP menu, you cannot hear the sound from the selected digital input. (For details, refer to "SETTING THE INPUT SETUP" on page 53.)
4. Press the AUDIO ASSIGN button.
•"AUD ~ " is displayed for several seconds.
•"AUD ~ " disappears, press the AUDIO ASSIGN button again.
5. Select the desired of the digital inputs connected while displaying "AUD ~ ".
•Each time the MULTI CONTOL knob is rotated or the CURSOR LEFT(◀)/RIGHT(▶) buttons are pressed, the corresponding input is selected as follows :
■Notes:
•When the selected digital input is not connected or assigned, "o1", "c1", etc (, meaning no digital signal input from it) or "d"(, meaning no audio assignment) flickers and no sound will be heard.
•The selected digital input is automatically assigned to the corresponding input source on the INPUT SETUP menu. (For details, refer to "SETTING THE INPUT SETUP" on page 53.)
•The sound from the component connected to the selected digital input can be heard regardless of the selected input source.
6. | Operate the selected component for playback. |
| ||||||||||||||
| • When playing back the program sources with |
|
| |||||||||||||
|
| surround sound, refer to “ENJOYING |
| |||||||||||||
|
|
| ||||||||||||||
|
| SURROUND SOUND” on page 34. | ENGLISH | |||||||||||||
7. | Adjust the (overall) volume. | |||||||||||||||
| ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Muting the sound
•"MUTE" flickers.
•To resume the previous sound level, press it again.
Listening with headphones
•Ensure that the SPEAKER button is set to off.
•Depending on the signal format which is being input, you can listen in Dolby Headphone mode, stereo mode, etc. (For details, refer to "Listening in Dolby Headphone mode" on page 35).
•When the EXTERNAL IN is selected as an input source, only front left and front right channel signals can be reproduced through the headphones.
■Note:
•Be careful not to set the volume too high when using headphones.
31
