12. CONNECTING MULTI-ROOM SYSTEM KIT
• The
For information on the
•IR IN jack allows you to control this receiver from another room with the remote control unit.
•To control this receiver from another room with the remote control unit, connect the IR IN jack to the output of the connecting block.
•If this receiver is located inside a cabinet or other enclosure where the signals from the remote control unit cannot enter, then operation with the remote control unit will not be possible. In such a case, connect the IR IN jack to the output of the connecting block.
�Notes:
•Remote operation may become unreliable if the IR receiver is exposed to strong light such as direct sunlight or inverted fluorescent.
•When the transmission signal mode is set to "RF", the IR receiver cannot accept the RF beams from the universal remote control and remote operation will become unreliable.
13. CONNECTING PC FOR UPGRADES
• This receiver incorporates USB as well as
• Connect either USB or
�Notes:
•Programming for upgrades and external control requires specialized programming knowledge and for that reason we
recommend that it only be done by qualified installers. For more information on future upgrades and external control, visit the Sherwood web site at www.sherwoodamerica.com or contact your dealer.
•Do not disconnect the connection cable while updating the operating software, etc. Should this happen, it may be result in malfunction or cause damage to the unit.
ENGLISH
13
