Treadbelt Adjustment
Do not tighten any pedestal or handrail screws until instructed.
Step 5: The proper side of each handrail is designated by a label. Install the handrails by sliding over the handrail stub next to the handlebar. Install two 2mm x 15mm screws at the top of each handrail. Install one 8mm x 50mm screw through the handrail clamp and into the bottom of the handrail as shown. Tighten all pedestal and handrail screws.
Step 6: Reinstall the motor cover using the Philips screwdriver. Place the safety key on the circle labeled Safety Key on the console.
Treadbelt Adjustment
Your treadmill’s running belt has been properly aligned at the factory. However, when the treadmill is used on an uneven surface, please follow these instructions:
7
