Motorola V950 manual Dialing Options, Answering Calls, Press O when you are finished with the call

4.Press O when you are finished with the call.

Tip	To redial your last outgoing call, press Ntwice.
	When making calls off the Sprint National Network,
	always dial using 11 digits (1 + area code + phone
	number).

You can also place calls from your phone by using speed dialing numbers from your Contacts (page 26), and using your History listings (page 72), and Setting Up Voice Recognition (page 100).

Dialing Options

When you enter numbers in standby mode, pressing Options (right softkey) displays a list of dialing options. To select an option, highlight it, and press S. The following options are available:

⬤Save adds the phone number to your Contacts as a new entry or to an existing entry. See “Saving a Phone Number” on page 24.

⬤Hard Pause (P) sends the next set of numbers when you press the left softkey.

⬤2Sec Pause (T) automatically sends the next set of numbers after two seconds.

⬤SelectDomain identifies a phone, allowing it to receive and make Direct Connect calls.

If you press Msg/Alert (left softkey), you can send a message to the number you just entered.

Answering Calls

1.Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.)

2.Press N to answer an incoming call.

— or —

Press Answer (left softkey).

(Depending on your phone’s settings, you may also answer incoming calls by pressing any key or by opening the phone when it is closed. See “Call Answer Mode” on page 59 for more information.)

Your phone notifies you of incoming calls in the following ways:

⬤The phone rings or vibrates.

⬤The backlight illuminates.

⬤The display screen shows an incoming call notification. If the incoming call is from a number

Phone Basics

Section 2A. Phone Basics 21