Direct Connect

Section 2B. Nextel Direct Connect 43

Making a TeamDC Call
1. Press Contacts (right softkey).
– or –
Press S > History.
2. Select a TeamDC group and press the DC button.
3. Continue the TeamDC call as any other Direct
Connect or Group Connect call.
4. When you are finished, press O to end the call.
(When you end a TeamDC call that you initiated, all
other participants are dropped from the call.)

Joining or Rejoining a TeamDC Call

If a member of a TeamDC call is not available at the
beginning of a call or if a member drops off the call
temporarily, they may rejoin the in-progress TeamDC
call.
1. Press S > History.
– or –
Press Contacts (right softkey).
2. Select the TeamDC entry and press the DC button.
3. Continue the TeamDC call as described previously.
TeamDC Call Information
During a TeamDC call, the following information may
appear on your screen:
The name of the group.
The name or Direct Connect number of the person
speaking.
Note Group Termination Options By default, when the
originator of a Group Connect or TeamDC call ends
the call, all other participants are disconnected as
well. When available, you will be able to select a
setting in Settings/Tools > Direct Connect > Group
Call to allow Group Connect and TeamDC calls you
initiate to remain active after you leave the call.
Tip You may also join or rejoin a TeamDC call from your
Contacts. Select the TeamDC group and press the
DC button.
Note If the TeamDC call has already ended, pressing the
DC button initiates a new TeamDC call.