Motorola V950 manual Ending a Direct Connect Call,  If the Direct Connect speakerphone is enabled

You may also hear the caller’s voice through the speakerphone. Speakerphone is turned on by default for Direct Connect calls. You can turn the speakerphone off and listen to Direct Connect calls through the earpiece as you would a regular call or you can listen through a headset.

1.Press the speakerphone button to either enable or disable the Direct Connect speakerphone feature.

If the Direct Connect speakerphone is enabled

, you will hear the caller’s voice through the speakerphone on the front of the phone.

If the Direct Connect speakerphone is disabled

, you will only hear the caller’s voice through the earpiece.

2.Accept the incoming call. If available, the caller’s name and Direct Connect number also appear on the display.

3.When the caller has finished speaking, a tone sounds and “Open” appears on the display.

4.Press and hold the DC button and wait for a tone to sound and a message (“Me”) to appear onscreen. Continue the Direct Connect call as described previously.

Tip		Press Oto dismiss an incoming Direct Connect	Connect
		Call.
Ending a Direct Connect Call			Direct
1.	Do nothing; the call will automatically end after
	several seconds if the DC button is not pressed by
	either party.
	– or –
	Press P

– or –

Close the phone.

Tip Quieting incoming callsand increasing your privacy.

When you are in an area where incoming Direct Connect calls may disturb others or if you wish to increase the privacy of your calls, please set your speakerphone to Off and your ringer to vibrate. When the speakerphone is off, Direct Connect calls use the phone’s earpiece and microphone, while still utilizing the DC button. You may also use an earbud or other hands-free device for increased convenience.

Section 2B. Nextel Direct Connect 35