Asante Technologies 6200 manual Status of Ethernet Segments in Example

VLAN Port Attribute Configuration

Table 9-4	Configuration used in example of tagging
Port	VLAN
	Group	Tagging	Connection
#
	Segment #s
1	V1, V5, V10	Enabled	SW1 and SW2 connected
2	V1	Disabled	SW1 and SW2 not connected
3	V5	Disabled	SW1 and SW2 not connected
4	V4	Disabled	SW1 and SW2 not connected
5	V4	Disabled	SW1 and SW2 not connected
6	V10	Disabled	SW1 and SW2 not connected

Status of Ethernet Segments in Example:

❏All the stations on ethernet segment E1 and E6 can talk between themselves, but they can't talk with stations on other ethernet segments since E1 and E6 belong to VLAN Segment V1 and other ethernet segments do not belong to V1.

❏All stations on E2 and E7 can talk between them- selves and not with stations on other ethernet segments.

❏All stations on E5 and E10 can talk between themselves and not with stations on other ether- net segments.

❏Stations on E3 and E4 can talk only between themselves. Likewise stations on E8 and E9 can talk only between themselves.

❏Though stations on E3,E4, E8 and E9 all belong to the same VLAN Segment,V4, the stations on E3 and E4 can't talk with stations on E9 and E10 since ethernet segment E11 does not belong to VLAN Segment V4.

Page 9-21