Asante Technologies 6200 manual Configuring STP Port Parameters, Return

Advanced Management

Configuring

STP Port

Parameters

Current Settings

The Spanning Tree Port Configuration Menu allows you to configure and manage the STP parameters of each port on the IntraSwitch.

▲Important! You should NOT configure any STP port parameters unless you have experi- ence with the IEEE 802.1d specification.

To configure the STP Port Parameters:

1	Type c in the Spanning Tree Configuration
	Menu.

The STP Port Configuration Menu appears, similar to Figure 7-2.

Figure 7-2	Spanning Tree Port Configuration Menu
2	Type s to select a port number.
3	Type o to set the port priority value for the
	port.
4	Enter the port priority value, then press
	Return.

ΔNote: See Table on page 7-11 for a description of port priority.

Page 7-10