Asante Technologies 6200 manual Using a straight-throughRS-232 cable with a

Installation

1	Using a straight-throughRS-232 cable with a 9-
	pin male D-subminiature plug at one end, con-
	nect a terminal or workstation (PC or Macintosh)
	running a terminal emulator to the Consoleport
	on the front of the IntraSwitch.
2	Make sure both units are powered on.
	If using a PC with a terminal emulator, make
	sure it is configured with the following terminal
	settings:
	❏	Baud: 9600
	❏	Data Bits: 8
	❏	Parity: None
	❏	Stop Bits: 1
	❏	Flow Control: None
3	Once connected, the Local Management Main
	Menu appears on the terminal screen, as shown

in Figure 2-3.

Figure 2-3 Local Management Interface Main Menu

4

5

Type c to open the Configuration Menu.

The “Enter Password” prompt appears.

Type your password at the prompt.

▲Important! The default password is Asante. The password is case-sensitive.

Page 2-10