Asante Technologies 6200 manual Tools Materials, Tools and Materials Required

Introduction

Tools and

Materials

❏(2) rack-mounting brackets

❏(16) standard Phillips screws

❏(1) MII cover bracket (IntraSwitch 6216M)

❏(4) Self-adhesive rubber feet)

❏(1) User’s Manual (this book)

❏(1) Registration Card

❏(1) Quick Install Card

▲Important! If you are missing any of the items listed above, contact the dealer from whom you purchased the unit.

Some tools and materials that are not supplied with the IntraSwitch are needed to connect it to an Ethernet network.

The table below lists the tools and materials required for connecting devices to the IntraSwitch’s ports and for rack- mounting the unit.

ΔNote: For specific instructions on connecting network devices to the IntraSwitch, see “Connect- ing to the Network” on page 2-6.

Table 1-1 Tools and Materials Required

Action	Tool/Material Required
Connecting 10/100	Standard Category 5 UTP straight-through
ports	cable with RJ-45 connectors.
	Standard Category 5 UTP cross-overcables
	with RJ-45 connectors.
Connecting 100Base-	Dual 62.5/125 micron graded-index
FX port (optional MII	multimode fiber-optic cable fitted with SC
module)	connectors.

Page 1-8