Asante Technologies 6200 manual System Reset Options

	System Reset Options
4	Select one of the options in the above screen
	to select the required baud rate and confirm

it by typing y.

5

6

Type a to select the Destination Bank.

Use any serial communications software like Procomm Plus, HyperTerminal, ZTerm, etc., to download the image file. Follow the instruction manual of the serial communica- tions software for file transfer instructions.

ΔNote: The terminal on which serial communica- tions software is running must have the same baud rate as the Switch console baud rate.The connec- tion between the terminal and the switch Console port is RS232C straight-through cable.

7	Type d to download to the selected destina-
	tion bank or b to download and reset.
8	Type q to return to the previous menu after
	performing a successful download.

ΔNote: The baud rate default for Console manage- ment is 9600 bps. If you select a baud rate for the console port, other than 9600 bps, the screen will display garbage data until the connected terminal is set to the same baud rate as the console.

System Reset Options

The System Reset Options Menu allows you to reset the IntraSwitch by performing a “warm” reboot. It also allows you to schedule a reset up to 24 hours in advance.

To reset the IntraSwitch, type r in the Configuration Menu. A screen similar to Figure 5-16 appears.

Page 5-39