In-Band Management

In-Band Management

In-band network management allows you to manage, control, and monitor the IntraSwitch and any installed expansion modules over the Ethernet network.

You can perform these functions by accessing the IntraSwitch via any of the following methods:

By connecting with a Telnet program and using the Local Management Interface.

By connecting with any common World Wide Web browser, and using the Web Management Interface.

By connecting with any SNMP-based network management application and using its interface.

To manage the IntraSwitch via in-band management:

1

Make sure the network to which the IntraSwitch

 

is connected is functioning.

2

Make sure the IntraSwitch is configured with

 

valid IP information.

 

See “Configuring for Management” on page 2-8.

3

Connect to the IntraSwitch via Telnet, with a

 

Web browser, or with any SNMP-based network

management application.

Telnet

See Chapter 5, Console Management, for infor- mation on managing the IntraSwitch.

Δ Note: Almost all management screens using a Telnet are identical to those of the out-of- band Console interface.

Web Browser

Refer to Chapter 8,Web Browser Management

Manual, for information on managing the

IntraSwitch with a Web browser.

Page 4-5

Page 46
Image 46
Asante Technologies 6200 manual In-Band Management