Asante Technologies 6200 manual Viewing Current Operating Information

Viewing Current Operating Information

Table 6-1 General Information Menu Parameters

Setting	Description
Running Image Version/Date	The version and compilation date of runtime
	code that is currently running on the unit.
Bank 1 Image Version/Date	The version and compilation date of runtime
	code that is stored in Bank 1.
Bank 2 Image Version/Date	The version and compilation date of runtime
	code that is stored in Bank 2.
Switch Name	The name assigned to the IntraSwitch.
Switch Location	The physical location of the IntraSwitch.
Switch Contact	Name of the person responsible for the unit.
DRAM Size	The size, in megabytes (MB), of the unit’s
	Dynamic Random Access Memory.
Flash Size	The size, in MB, of the IntraSwitch flash
	memory. Flash memory is non-volatile RAM.
EEProm Size	Size, in kilobytes, of the unit’s EEPROM.
Console Baud Rate	The current setting of the console port’s baud
	rate/speed.
MAC Address	The IntraSwitch’s hardware address.
	Note: This address cannot be changed.
IP Address	The units’s IP (Internet Protocol) address.
Subnet Mask	The IntraSwitch’s IP subnet mask.
Router	The IP address of the default gateway router to
	which the IntraSwitch belongs.
Boot Load Mode	The current method the unit is using to load
	its software.
TFTP Server	The IP address of the TFTP server configured
	for the IntraSwitch.
Boot File Name	The name and network path of the
	IntraSwitch’s software file.

Page 6-3