Asante Technologies 6200 manual Rack Mounting Desktop Placement, Equipment Rack Installation

Rack Mounting/

Desktop

Placement

Equipment Rack Installation

		Rack Mounting/Desktop Placement
Table 2-1	Installation Overview
Step		Action
1 (required)		Open the box and check the contents.
		See “Package Contents” on page 1-7 for a complete
		list of the items included with your IntraSwitch.
2 (optional)		Install MII expansion module(s), if any.
		See “Installing MII Modules” on page 2-5.
3 (required)		Install the IntraSwitch in an equipment rack or prepare
		it for desktop placement.
		See “Rack Mounting/Desktop Placement” on page 2-3.
4 (required)		Connect the power supply.
		See “Connecting Power” on page 2-6.
5 (required)		Connect network devices to the IntraSwitch.
		See “Connecting to the Network” on page 2-6.
6 (optional)		Configure the IntraSwitch for management
		capabilities.
		See “Configuring for Management” on page 2-8.

The IntraSwitch can be installed in a standard 19-inch equipment rack. It can also be placed on a stable horizontal surface with support capabilities of 12 pounds (5.4 kilograms).

To install the unit in an equipment rack, use the following procedure. Refer to Figure 2-1 below.

Power										Utilization				Intra			Switch 6224
100Mbps
FDP
Data
Link
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

2	4	6		Switched 10/100Mbps Ports
			8	10	12	14
							16	18	20
										22	24
1	3	5	7	9	11
						13	15	17	19	21	23
												Console

Figure 2-1 IntraSwitch Rack Installation

Page 2-3