Asante Technologies 6200 manual Bootstrap Configuration, Changing System IP Information

Console Management

Changing System IP Information

To change the IntraSwitch’s IP address, subnet mask, or default router information:

1

2

3

Open the System IP Configuration Menu by typing i in the Configuration Menu.

Type the command letter of the option you want to change.

Type the new address at the prompt.

See Table 5-5 for a description of each address.

▲Important! Follow the format: num- ber. number. number. number.

To cancel, press ctrl-cat the command prompt.

4 Press Return.

The IntraSwitch’s IP information is changed.

To quit and return to the Configuration

Menu, type q.

Bootstrap Configuration

This menu displays (and allows you to change) the bootstrap parameters used for loading the IntraSwitch’s software at startup, and for downloading a new version of software when one is issued.To access the Bootstrap Configuration Menu, type b in the Configuration Menu. A screen similar to Figure 5-6 appears.

Page 5-12