Asante Technologies 6200 manual Type 0 to make management belong to all

VLAN Management

Configuring Man- agement VLAN

Displaying System VLAN Summary

Displaying Port

VLAN Map

When the port involved is a Tagged port, the port's original VLAN Group membership is not revoked.

Take the following steps to configure a management VLAN.

1	Type g on the VLAN configuration Menu.This
	displays the prompt:
	Enter VLAN Groups separated by space
	(0 means ALL) >
2	Type 0 to make management belong to all
	VLANs in the system or enter specific VLAN
	Group numbers, following each by a space.
3	Press return.This displays a confirmation mes-
	sage.
4	Type y to accept and n to cancel the operation.

If y was selected, the management VLAN will be changed according to the request.The changes are reflected on the screen next to the field MGMT Access:in each VLAN Group screen.

ΔNote: The VID, VLAN Name, VLAN Members and MGMT ACCESS information are stored in a Non-Volatile Database so you do not have to re- configure them each time the system starts.

To display the system VLAN summary, press v in the VLAN Configuration Menu.This brings up the screen which shows all VLAN Groups and their member information.The VID of each VLAN Group and switch management accessibility information are also displayed on this screen.

To display a summary of the system’s port VLAN association, press l in the VLAN Configuration Menu.This brings up the screen which shows all Ports and their VLAN Group association information.

Page 9-12