Asante Technologies 6200 manual Port Configuration, Deleting a Trap Receiver

Console Management

The trap receiver entry is added.

To return to the Configuration Menu, type q.

Deleting a Trap Receiver

To delete a trap receiver entry:

1	Open the SNMP Configuration Menu by typ-
	ing n in the Configuration Menu.

2

3

Type d to Delete a Trap Receiver.

Type the number of the receiving network management station entry to be deleted, then press Return.

The trap receiver entry is deleted.

To return to the Configuration Menu, type q.

Port Configuration

This menu allows you to manually configure each of the IntraSwitch’s ports and any installed MII expansion modules for speed, connection, link mode, and auto-negotiation.

It also provides an overview of the entire IntraSwitch system’s port operating status.The Advanced Port Configuration option “v” allows you to configure ports BC filtering and its auto- negotiation advertisement.

The default parameters for each of the IntraSwitch’s ports are:

❏auto-negotiation — enabled; auto-negotiates to 10 or 100Mbps half or full duplex

To access the Port Configuration Menu, type p in the Configuration Menu. A screen similar to Figure 5-9 appears.

Page 5-20