Asante Technologies 6200 manual Performing a Software Upgrade at Runtime

	Image Downloading Through TFTP
Setting	Description
Protocol	The current method being used to download a software
	image file from the network.
	This protocol is always set to TFTP.
Image Server IP	The IP address of the network server containing the
	IntraSwitch’s software image file.
Image File Name	The software image file’s name and network path.
Retry Count	The number of attempts the IntraSwitch makes to
	download the image file.
Destination Bank	The number of the destination bank to where the
	software file will be downloaded and stored.

Performing a Software Upgrade at Runtime

The software image file must be downloaded from a network management station on your network that contains capabilities.

To upgrade the IntraSwitch’s software:

▲Important!Make sure the IntraSwitch is config- ured with an IP address.

1Open the TFTP Image File Downloading ConfigurationMenu by typing t in the

Image File Downloading Configuration Menu.

2

3

4

5

6

Type s to set the Image Server Address.

Enter the IP address of the server containing the image file at the prompt, then press Return.

Type f to set the Image File Name.

Enter the image file’s name and network path at the prompt, then press Return.

Type c to set the Retry Count.

Page 5-35