Asante Technologies 6200 manual Image Banks, BootStrap Configuration Menu

Bootstrap Configuration

Current Settings

Figure 5-6 BootStrap Configuration Menu

▲Important! The IntraSwitch’s default Load Mode setting is Local.

When the IntraSwitch is powered on, it loads its software via one of two methods: locally (via its internal flash memory which is the default setting) or remotely over the network.

Image Banks

The IntraSwitch has two banks to store its run time software.

The banks are referred to as bank 1 and bank 2.

Either of these banks may be the Boot Bank, which is the bank where the runtime code will be loaded the next time the IntraSwitch is booted.

When downloading new runtime image codes, the user may specify either of the two banks as the Destination Bank in which the new code will be loaded.

Page 5-13