Asante Technologies 6200 manual Configuring for Management

Configuring for Management

6

7

8

9

10

For information on changing the password, see “Changing the Password” in Chapter 5.

Type i to open the Switch IP Configuration menu.

Type i to select the option “Set IP Address.”

Type the IP address to be assigned to the IntraSwitch at the prompt.

ΔNote: Depending on your network configu- ration, you may also need to set subnet mask and default gateway (router) information.

See “System IP Configuration” in Chapter 5 for instructions.

Press Return.

Type q to return to the Configuration Menu.

The IntraSwitch is configured with an IP address and can now be managed via in-band access. See Chapter 4,“Setting Up For Management” for more information.

Page 2-11