Asante Technologies 6200 manual Configuring Duplex Mode

Console Management

2	Select the port to be enabled or disabled by
	typing s, entering the port’s number, and
	pressing Return.
3	Type e to toggle the port’s connection to
	enabledor disabled, as desired.

The port’s status is changed. The new status is displayed at the top of the screen next to Port Status:.

Configuring Duplex Mode

Full duplex mode allows a port to transmit and receive at the same time.

▲Important! To use full duplex mode, the device to which the port is connected must sup- port and be configured for full duplex mode.

ΔNote: To configure a port for duplex mode, first disable auto-negotiation, as described in the next section.

1Open the Port Management Menu by typing p on the Configuration Menu.

2Select the port to be configured for full duplex mode by typing s, entering the port’s number, and pressing Return.

3Type d to toggle the port’s duplex mode half to full, or full to half.

The port’s mode is changed and is displayed at the top of the screen next to Link Status.

Page 5-24