Honeywell 4800dr Tele pen, Tele pen

6 - 14
Tele pen
<Default All Telepen Settings>
Tele pen
Telepen Output
Using AIM Telepen Output, the document reader reads symbols with start/stop pattern 1 and decodes
them as standard full ASCII (start/stop pattern 1). When Original Telepen Output is selected, the doc-
ument reader reads symbols with start/stop pattern 1 and decodes them as compressed numeric with
optional full ASCII (start/stop pattern 2).
Default = AIM Telepen Output.
Telepen Message Length
Scan the barcodes below to change the message length. Refer to Message Length Description (page 6-
2) for additional information. Minimum and Maximum lengths = 1-60. Minimum Default = 1, Maximum
Default = 60.
On
* Off
Original Telepen Output
* AIM Telepen Output
Minimum Message Length
Maximum Message Length