Reprogram the document reader with the correct Plug and Play or Terminal selection barcode. See Chapter 1 and Chapter 2.
•The document reader may not be programmed to output your barcode data properly. For example, you scan “12345” and the host displays “A12345B.”
Reprogram the document reader with the proper symbology selections. See Chapter 6.
The document reader won’t read your barcode at all.
1.Scan the sample barcodes in the back of this manual. If the document reader reads the sample bar- codes, check that your barcode is readable.
Verify that your barcode symbology is enabled (see Chapter 6).
2.If the document reader still can’t read the sample barcodes, scan "All Symbologies" on page
If you aren’t sure what programming options have been set in the document reader, or if you want the factory default settings restored, scan Standard Product Default Settings on page
12 - 3
