Next, scan the Character to Trigger Delay barcode, then the 2-digit hex value for the ASCII character that will trigger the delay ASCII Conversion Chart (Code Page 1252), page A-3.

Delay Length

Character to Trigger Delay

To remove this delay, scan the Delay Length barcode, and set the number of steps to 0. Scan the Save barcode using the Programming Chart inside the back cover of this manual.

Interfunction Delay

An interfunction delay of up to 495 milliseconds (in 5 ms steps) may be placed between the transmission of each segment of the message string. Scan the Interfunction Delay barcode below, then scan the number of 5 millisecond steps (0-99), and the Save barcode using the Programming Chart inside the back cover of this manual.

Prefix

Scanned Data

Suffix

STX

1

HT

2

3 4

5

CR

LF

Interfunction Delays

Interfunction Delay

To remove this delay, scan the Interfunction Delay barcode, then set the number of steps to 0. Scan the Save barcode using the Programming Chart inside the back cover of this manual.

Intermessage Delay

An intermessage delay of up to 495 milliseconds (in 5 ms steps) may be placed between each scan transmission. Scan the Intermessage Delay barcode below, then scan the number of 5 millisecond steps (0-99), and the Save barcode using the Programming Chart inside the back cover of this manual.

1st Scan Transmission 2nd Scan Transmission Intermessage Delay

Intermessage Delay

To remove this delay, scan the Intermessage Delay barcode, then set the number of steps to 0. Scan the Save barcode using the Programming Chart inside the back cover of this manual.

4 - 5

Page 41
Image 41
Honeywell 4800dr manual Interfunction Delay, Intermessage Delay