On
* Off
When Check Character is set to Validate, but Don’t Transmit, the unit will only read MSI barcodes printed with the specified type check character, but will not transmit the check character with the scanned data.
*Validate Type 10, but Don’t Transmit
Validate Type 10 and Transmit
MSI Message Length
Scan the barcodes below to change the message length. Refer to Message Length Description (page 6-
2)for additional information. Minimum and Maximum lengths =
Minimum Message Length
Maximum Message Length
Plessey Code
<Default All Plessey Code Settings>
Plessey Code
Plessey Message Length
Scan the barcodes below to change the message length. Refer to Message Length Description (page 6-
2)for additional information. Minimum and Maximum lengths =
Minimum Message Length
Maximum Message Length
6 - 23