7
OCR Programming
Use this section to program the Imager for optical character recognition (OCR). The 2D imager reads 6 to 60 point OCR typeface.
Note: OCR is not as secure as barcodes. To enhance security in OCR applications, create an OCR template to match the data, and print an OCR check character.
The 2D imager will read
You can either select an OCR default, or create your own custom template for the type of OCR format you intend to read. See "OCR" on page
Note: Setting the template and check character options are essential for OCR reading.
OCR Fonts
Default All OCR Settings turns off all OCR capability in the imager, so the imager will be able to scan linear, stacked, matrix, and composite barcodes, but not OCR fonts. In addition, any OCR templates you have created are erased. The eight digit default templates are reinstated for any future use of the
codes listed below.
< Default All OCR Settings >
OCR
Note: OCR symbols can misread when scanned sideways or upside down. Use Working Orientation, page
Only one OCR symbology can be read at a time.
7 - 1