Honeywell 4800dr manual Data Format Editor, Data Formatter, Alternate Data Formats

Data Format Editor

Enter Data Format

* Default Data Format

Clear One Data Format

Clear All Data Formats

Save

Discard

Data Formatter

When Data Formatter is turned off, the barcode data is output to the host as read (including prefixes and suffixes). Choose one of the following options. Default = Data Formatter On, but Not Required.

*Data Formatter On, but Not Required

Data Formatter Off

When Data Formatter is required, all input data must conform to an edited format or the document reader does not transmit the input data to the host device.

Data Format On, Format Required

Alternate Data Formats

Alternate formats allow you “single shot” capability to scan one barcode using a different data format than your primary format. When data formats are programmed (see page 5-1), you must input whether you are programming the primary format, or an alternate format numbered 1, 2, or 3.

5 - 4