Phone Basics

Section 2A. Phone Basics 15

Turning Your Phone On and Off

Turning Your Phone On

䊳Press and hold O for approximately two seconds.
Once your phone is on, it may display “Searching for
Service.” When your phone finds a signal, it
automatically enters standby mode – the phone’s idle
state. At this point, you are ready to begin making and
receiving calls.
If your phone is unable to find a signal after 15 minutes
of searching, a Power Save feature is automatically
activated. When a signal is found, your phone
automatically returns to standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also
initiate a search for Sprint service by pressing any key
(when your phone is turned on).

Turning Your Phone Off

䊳Press and hold O for two seconds until you see
the powering down animation on the display
screen.
Your screen remains blank while your phone is off
(unless the battery is charging).
Using Your Phone’s Battery and Charger
Sprint-approved or Motorola-approved batteries and
accessories can be found at Sprint Stores or through
Motorola; or call 1-866-343-1114 to order. They’re also
available at www.sprint.com — click Accessories.
Tip The Power Save feature conserves your battery
power when you are in an area where there is no
signal.
WARNING Use only Sprint-approved or Motorola-
approved batteries and chargers with your
phone. The failure to use a Sprint-approved or
Motorola-approved battery and charger may
increase the risk that your phone will overheat,
catch fire or explode, resulting in serious
bodily injury, death or property damage.