Motorola V950 Making a GroupConnect Call From Contacts, Making a Group Connect Call From History

Making a GroupConnect Call From Contacts

1.Press Contacts (right softkey).

2.Select a Group and press the DC button to begin the Group Connect call.

3.Continue the Group Connect call in the same manner as a one-to-one Direct Connect call.

Note Only one person at a time may speak on any Direct Connect or Group Connect Call.

4.When you are finished, press O to end the call. (When you end a Group Connect call that you initiated, all other participants are dropped from the call.)

Note	If you get an error message saying that your contact
	“is not reachable via Direct Connect” or “this number
	is not DC capable,” please check to see that you
	have highlighted a valid Direct Connect number.
	Currently Sprint phones do not support Group
	Connect calls with Nextel and PowerSource phones.
	This enhancement is planned for later 2008. If your
	calls are not going through, please check to see if
	your contact is using a Sprint phone.

Making a Group Connect Call From History

1.Press S> History.

2.Select a Group Connect call entry and press the DC button.

3.Continue the Group Connect call as described previously.

Joining or Rejoining a Group Connect Call

If a member of a Group Connect call is not available at the beginning of a call or if a member drops off the call temporarily, they may rejoin the in-progress Group Connect call.

1.Press S> History.

2.Select the call and press the DC button.

3.Continue the Group Connect call as described previously.

Tip	You may also join or rejoin a Group Connect call
	from your Contacts list if the group has been stored.
	Select the group entry and press the DC button.

40 Section 2B. Nextel Direct Connect