104 Section 2J. microSD Card

To insert the microSD card into your phone:
1. With your phone powered off, remove the back
cover and then remove the battery. (See
“Removing the Battery” on page 17.)
2. Gently slide the microSD card into the cardholder
as shown below. You should notice a faint click if it
engages properly in the spring-loaded holder.
3. Replace the battery and the back cover.
Removing the microSD Card
1. With your phone powered off, remove the back
cover and then remove the battery.
Note Your phone comes equipped with a microSD card
already installed. Do not bend or scratch your
memory card. Keep it away from static electricity,
water, and dirt.
The microSD card and its adapter can be easily
damaged by improper operation. Please be careful
when inserting, removing or handling them.
Tip The writing on the microSD card should face up.
Note Make sure your battery is fully charged before using
the microSD card. Your data may become damaged
or unusable if the battery runs out while using the
microSD card.
Be sure to use only recommended microSD cards
(64MB—8GB). Using non-recommended microSD
cards could cause data loss and damage your
phone.