Polk Audio ATRIUM50BK owner manual You will need, Masquez les bornes à larrière de lenceinte

PAINTING YOUR ATRIUM AW

LOUDSPEAKERS

You will need:

•A spray can of primer paint (Krylon Sandable Spray Primer #1318)

•A spray can of the paint of your choice. Choose exterior grade paint if you plan to use the speakers outdoors

•A paperclip or corkscrew (for removing the paintable grille)

•Masking tape

•Paint mask (to cover unpaintable parts— not included. To make an easy paint mask, use the grille as a template and cut a mask from heavy, nonporous Kraft paper.)

PREPARING TO PAINT:

1.Separate the parts of the speaker. Remove the brackets and bracket knobs. Remove the grille by carefully hooking it with a bent paper clip and pulling it gently away from the cabinet [figure 4].

2.Mask off the binding posts on the back of the speaker [figure 5], the end panels and bracket knobs, and carefully mask off the front of the speakers to protect the dri- vers and baffles while painting [figure 6]. The grille features an engraved logo pod. You can mask this off or paint right over it.

FIGURE 4

Remove the grille using a paper clip.

Quite la rejilla con un sujetapapeles.

Retirez la grille en utilisant un trombone.

Entfernen Sie den Gitteraufsatz mit einer Büroklammer.

FIGURE 5	FIGURE 6
Mask the binding posts on the rear of the speaker.	Mask the drivers and baffles.
Cubra con cinta de enmascarar los tornillos de presión ubicados en la parte de atrás del altavoz.	Cubra con cinta de enmascarar los excitadores y los bafles.
Masquez les bornes à l'arrière de l'enceinte.	Masquez les haut-parleurs et les écrans acoustiques.
Decken Sie die Anschlussklemmen auf der Rückseite des Lautsprechers ab.	Decken Sie die Treiber und Resonanzwände ab.

4 Get more infor mation and exclusive accessories, visit www. polkaudio . com