Polk Audio 6500BT manual Bar Controls, BAr Power

SOURCE LED GUIDE

SOURCE 1

SOURCE 2

SOURCE 3

Bluetooth

1	2	3	4	5
LEARN SOURCE			MUTE

FRONT

	BACK
POWER		24V
		2.5A		SOURCE	SYNC
	OFF
	ON		1	2	3
		60W

Bar Controls		6	7	8	9
Front Panel:				BAr Power (		) LED
1. Learn—Puts the bar into “learning mode” so
				normal Operating mode:
you can program it to respond to commands				Green Steady—Power is on; all is well.
from your existing remote control.
2. Source—Changes which input source				Red Steady—The bar is in standby mode.
you are listening to.				Green Two Blinks—A remote control or keypad
Source 1: digital/optical
				operation signal is received successfully.
Source 2: analog
				Green Slow Blinking—System is muted.
Source 3: analog
Source 4 Bluetooth ( ): Bluetooth® wireless				Green Fast Blinking (After pressing volume up
technology (See “PAIR AND CONNECT YOUR
				button)—You have reached the maximum volume.
BLUETOOTH DEVICE WITH THE SURROUNDBAR”
on page 8.)				Green Fast Blinking (At power up)—The bar and
LED—Blue light indicates which Source has				subwoofer have established a wireless connection.
been selected (see Source LED Guide above).
Source 1 LED will light green if Dolby Digital				learning mode: (See page 9 for instructions.)
signal is being decoded.
				Orange Blinking—The bar is in learning mode.
3. Power (	)—Turns on the bar or puts
it in standby mode.				Orange Steady—The bar is in learning mode
LED—A light that shines green, orange				and a function has been selected.
or red to indicate operating status.				Green Blinking—The bar has successfully
4. Mute—Mutes and unmutes the sound				learned a remote control command.
coming from the SurroundBar 6500 BT,				Red Blinking—The bar has failed to learn
indicated by green slow flash.
				a remote control command.
5. Volume Up and Down ( /		)—Adjusts		Red and Orange Blinking—Learned IR codes
the volume of the SurroundBar 6500 BT.
				have been successfully erased.
BacK Panel:
6. Power Switch—Turns the bar on or off,				Source LED:
but you can leave it on all the time.				Green Blinking—Dolby Digital source
7. Power Connection—The bar power supply connects here.				recognized (Source 1 only).
8. Audio Inputs (Source 1, 2 or 3)—Where you connect				Green Steady—Dolby Digital source received
your TV (or other sources) to the SurroundBar 6500bt.				and is being decoded (Source 1 only).
Use the 6’ optical cable (Source 1) provided or 1/8"

analog cable (Source 2 or 3) provided. Blue Steady—PCM or analog source received.

9.SYNC—The SYNC button ensures the subwoofer and bar are communicating. (See “Connecting the bar and wireless subwoofer” on page 7.)

Customer Service Hours of Operation: Monday-Friday, 9am-5:30pm est polkcs@polkaudio.com 3