DX System Tweeters

FIG. 2

1.Cut a hole in the panel. The grilles supplied with the dX Series drivers can be used as a tem plate for marking the cutout holes.

2.Using the speaker grille as a template for marking the locations of the four screw holes.

3.Drill the holes with a 1/8" bit.

4.Attach the screw clips to the car panel at the hole locations.

5.Cut the supplied tweeter wire in half.

6.Attach speaker wires to the crossover “woofer” terminals. Attach the wire with the white stripe to the positive (+) terminal screw, and the un-striped wire to the negative (-) terminal screw.

7.Using a crimping tool, attach faston connectors to the speaker end of each of the wires going from the crossover to the mid/woofer.

8.Remove the mesh grille from the grille frame and pass the wire through the grille frame.

9.Slip the faston connectors onto the input terminals on the mid/woofers. Be sure to attach the wire with the white stripe to the positive (+) terminal, and the un-striped wire to the negative (-) terminal.

10.Place the speaker into the grille frame and line up the screw holes with the screw clips on the car panel.

11.Secure the speaker/grille frame assembly to the car panel with the supplied screws.

12.Place the mesh grille in the grille frame.

One important advantage of component systems is their ability, when properly installed, to improve the soundstage created by the music in your car. The soundstage is the musical “picture” made up of the instruments and vocalists. The difference in the soundstage will be dramatic depending on where you mount your tweeters. We recommend a simple experi- ment that will help you decide the best spot for your tweeters in your car. Here are the steps:

1.Complete the installation of your entire system except for the dX3000 tweeters.

2.Connect the wires provided with your tweeters to the tweeter terminals on your dX crossovers.

3.Without running the wires through doors or under upholstered panels, connect your dx tweeters to these wires.

4.Have a friend sit in the passenger’s seat while you sit in the driver’s seat, each holding a tweeter in hand.

dXS erie s

5.With music playing, position the tweeters in different locations around the passenger compartment, listening for the differences caused from these placements. We recom- mend using vocals for this test. You will be able

to determine in a short time the best location for your tweeters.

The Polk dX3000 tweeter offers two mounting options for installation flexibility.

Mounting Option #1- Surface flat or angle base mounting the dX3000 Tweeter

1. Using the base of the surface mount cup as a tem- plate, mark the screw hole and drill it using a 1/8 inch drill bit. Mark the wire hole (for the tweeter wires), drill using the 1/4 inch drill bit.

2.Attach the surface mount cup to the panel using supplied #4 screws.

3.Push the tweeter wires through the hole in the bottom of the cup and through the panel.

4. Cut the wire supplied in the box in half. (Check that the connector ends are the same as those on the tweeter.)

5.Connect wires from the tweeter terminals of the crossover to the tweeter wires. Be sure that connector ends are the same as those on the tweeter. Connect the white striped wire strand to the (+) terminal of the crossover tweeter output and to the red wire on tweeters (Figure 2).

6.Mount the tweeters by twist-locking them onto the base, being careful not to pinch the wires.

Mounting Option #2 - Flush mounting the dX3000 Tweeter

1.Remove the panel on which you are going to mount the tweeter and check for proper clearance behind it. The flush mount kit is 1 inch deep. Measure to make sure there is sufficient depth behind the spot you choose.

2.Use the template which is provided as a separate sheet in the owner’s manual to mark the location and size of the mounting hole.

3.Mark the center of the hole and cut a 2.1 inch hole with razor knife or reciprocating saw.

dXS erie s

Premium Performance Loudspeakers

DX6510, DX3000, DX3055, DX5510, DX3065 specifications

Polk Audio, a well-respected name in the audio industry, has continuously pushed the envelope in delivering high-quality sound systems for various applications. Among its impressive line of speakers, the DX series stands out due to its blend of advanced technology, acoustic performance, and aesthetic appeal. The lineup includes models such as the DX5510, DX3055, DX3000, DX3065, and DX6510, each offering distinctive features tailored to enhance the listening experience.

Starting with the DX5510, this model is known for its high-efficiency driver design, allowing for exceptional sound clarity at varying volume levels. It incorporates a dynamic balance woofer, which minimizes distortion and maximizes performance. Additionally, its sophisticated crossover network ensures that sound transitions smoothly between the woofer and tweeter, providing a rich, full-spectrum audio experience.

The DX3055 takes these attributes to the next level by introducing a larger woofer to enhance bass response. This speaker is ideal for home theater setups, delivering powerful lower frequencies that bring movie soundtracks and music alive. The integrated tweeter is designed to deliver crisp and clear highs, allowing for detailed reproduction of vocals and acoustic instruments.

On the other hand, the DX3000 provides a compact option without compromising sound quality. It boasts a lightweight construction and efficient driver technology, making it suitable for smaller spaces where sound performance is crucial. Its versatile design allows for easy integration into various setups, from bookshelf installations to desktop arrangements.

The DX3065 is particularly notable for its wide soundstage and immersive audio capabilities. This model features advanced imaging technologies that create an enveloping listening environment, making it perfect for music lovers and movie enthusiasts alike. Its robust build quality and elegant aesthetics also make it a visually appealing addition to any room.

Lastly, the DX6510 is a flagship model that combines premium components with cutting-edge engineering. It is engineered for high-performance sound across genres, whether you're listening to classical orchestras or contemporary pop hits. The use of high-damping materials reduces unwanted resonance, ensuring that the sound remains true to its source.

In conclusion, the Polk Audio DX series – consisting of the DX5510, DX3055, DX3000, DX3065, and DX6510 – showcases a rich array of features and technologies designed to enhance audio quality. With their innovative designs and performance capabilities, these speakers truly embody Polk Audio’s commitment to delivering exceptional sound experiences. Whether for casual listening or dedicated home theater use, the DX series promises to meet the demands of even the most discerning audiophiles.

Polk Audio DX5510 DX System Tweeters, Mounting Option #2 Flush mounting the dX3000 Tweeter

Models: DX6510 DX3000 DX3055 DX5510 DX3065