Polk Audio dimensions LC265i-IPHardware included, Accessories not included, Overall Height

THIS DOCUMENT APPLIES TO LC265i-IP AND LC80i-IP PRODUCTS

Cutsheet for LC265i-IP/LC80i-IP

World’s First Active High Performance IP Addressable Loudspeakers

Polk Audio LCi-IP Ultra High Performance In-Wall/ In-Ceiling Loudspeakers are the world’s first active Internet Protocol-ready Loud- speakers. They were created for IP networked systems (such as the ground-breaking NetStreams™ DigiLinx™ system). Integrated digital amplifiers eliminate remote amplifiers connected via hundreds of feet of performance-robbing speaker wires. The built-in Digital Signal Processor (DSP) and supplied Room Correction Software (the Performance Optimization Wizard™) enable every LCi-IP speaker to be optimized for maximum performance in any room. While the LCi-IP Series provides the greatest functionality when used within an IP-based system, these speakers are also compatible with any analog distributed audio system.

LC265i-IP Hardware (included)

• One LC265i-IP speaker

•Performance Optimization Wizard – CD-ROM

•Euro-style (Phoenix) power supply connector

•Mounting template

•Paint mask

•Weather-resistant aluminum grille and stainless steel hardware

•	LCi-IP manual
		Cutout
• Laminated configuration setup card		Dimension
		19 1/4"
•	Registration card
		(48.9 cm)

Note: If you are setting up LCi-IP speakers to be controlled via an IP-network such as NetStreams™ Digilinx™, purchase a network card, which is sold separately, from NewStreams™. The network card will control up to one pair of speakers.

Important Note: If anything is missing or damaged, or if your LCi-IP speaker fails to operate, notify Polk Audio Installer Support Services immediately at 800-377-7655. Hours: Mon-Fri, 9am - 5:30pm EST.

Accessories (not included)

•Performance Enclosure for exact volume enclosure performance in pre-build installations. Improves bass performance and sound isolation. Model number: ENCL265.

•Speaker-level-to-line-level transformer, such as the PAC SNI-35.

(For analog installations only. Powers up to 2 each LC265i-IP speakers.)

•SPS-1 Power Supply (a power supply is required).

LC265i-IP Performance Enclosure Dimensions

55 5/8" H x 14" W x 3 3/8" D (141.3cm x 35.6cm x 8.6cm)

	Total
Cutout	Depth
	3 9/16"
Dimension
	(9.1 cm)
7 1/4"
(18.4 cm)

LC265i-IP Dimensions

Overall Height	20 7/8" (55.5cm)
Overall Width	8 1/2" (30.4cm)

Available Finish: Paintable White

w w w . P o l k A u d i o . c o m / 8 0 0 . 3 7 7 . 7 6 5 5 ( U S A & C a n a d a ) / 4 1 0 . 3 5 8 . 3 6 0 0 ( W o r l d w i d e )

1