Polk Audio LC80i-IPHardware, LC80i-IPDimension, LC80i-IPPerformance Enclosure Dimensions

LC80i-IP Hardware

•One LC80i-IP speaker

•Performance Optimization Wizard – CD-ROM

•Euro-style (Phoenix) power supply connector

•Mounting template

•Paint mask

•Weather-resistant aluminum grille and stainless steel hardware

•LCi-IP manual

•Laminated configuration setup card

•Registration card

Note: If you are setting up LCi-IP speakers to be controlled via an IP-network such as NetStreams™ Digilinx™, purchase a network card, which is sold separately, from NewStreams™. The network card will control up to one pair of speakers.

Important Note: If anything is missing or damaged, or if your LCi-IP speak- er fails to operate, notify Polk Audio Installer Support Services immediately at 800-377-7655.

Accessories (not included)

•Performance Enclosure for exact volume enclosure performance in pre-build installations. Improves bass performance and sound isolation. Model number: ENCL 80IP.

•Speaker-level-to-line-level transformer, such as the PAC SNI-35.

(For analog installations only. Powers up to 4 each LC80i-IP speakers.)

•SPS-1 Power Supply (a power supply is required).

Cutout

Dimension

97/16" (23.9 cm)

Total

Depth

77/16" (18.9 cm)

LC80i-IP Dimension

Outer Diameter 10 3/4" (27.3cm)

Available Finish: Paintable White

LC80i-IP Performance Enclosure Dimensions

20 5/8" H x 13" W x 9" D (51.8cm x 33.0cm x 22.9cm)

Power Supply

The SPS-1 power supply was specifically designed to produce clean, reliable power to ensure that all Polk Audio LCi-IP loudspeakers perform to their maximum capabilities. All output connectors are protected against short circuit and over current.

Power Connectors

For optimum performance, we recommend using 14-gauge, 4-conductor wire between the power supply and each amplifier (see the LCi-IP manual for other wiring options).

Specifications

Output
Voltage	48VDC	IEC Socket
Current	8A (Max continuous)
Input		This is a standard
		IEC socket.
Voltage Range	100-240 VAC Nominal Auto Switching
Frequency	50-60Hz
Current Draw	8A (120V)
	3.5A (240V)
Dimensions
Width	4.9" (125mm)
Height	3.1" (79mm) , 3 11/16"(93.6mm) with feet
Length	14" (358mm)
Shipping Weight	8.4lbs (4kgs)
Protection	Thermal, short circuit,current/power overdraw
Fuse Replacement	T8AH500V

Note: Leave at least 2-3 inches of clearance on the sides and top of the power supply.

Capabilites

SPS-1 will power 2 LC265i-IP speakers or 4 LC80i-IP speakers.

2

P o l k A u d i o C u s t o m I n s t a l l P r o d u c t : L C 2 6 5 i - I P, L C 8 0 i - I P