LC265i-IP/LC80i-IP Specifications (continued)
Connections
Wire Recommendations
Network Line
Shielded Cat5e or Cat6 cable with
COMM Line
Shielded Cat5e or Cat6 cable with
Analog Line
Low capacitance
USB Connection
USB 1.1,
Power Lines
These recommendations are for all connections from the power supply to each speaker. 14/4 is recommended for all applications. If this is not possible, refer to this chart:
Wire length | Wire gauge/ |
| # of Conductors |
<50’ | 16/2 |
16/4 | |
>100’ | 14/4 |
Network Decoder Card
See Owner’s Manual for installation instructions
Amplifier Connections
Eurostyle
RCA(Phoenix)
Power In
COMM | Tweeter |
Network In
Recommended Configuration
Polk Audio provides the Performance Optimization WizardSM
on
Walking Through the Room Optimization Choices
•This program can be used for installing and setting up
Figure 1
Depending on the speaker you’re installing, its location and the room, you may be asked for a series of measurements, including the height of the listening room’s ceiling, distances from walls, ceiling and floor to the speaker(s), as well as vertical and horizontal angles of speakers relative to the listening area. You may also be asked to provide measurements for the height, width, depth and center of the listening area (see the
Factory Support
For product support visit our website at www.polkaudio.com or Polk Audio Customer Service:
For more information on the
4
P o l k A u d i o C u s t o m I n s t a l l P r o d u c t : L C 2 6 5 i - I P, L C 8 0 i - I P