De la grille avec la peinture figure | Polk Audio TC60I, TC80I

PAINTING THE FRAME:

1.Apply paint to exposed unmasked parts. Use two or more thin coats. Spray painting is recommend- ed [figure 7].

2.When the paint is completely dry, remove the masking material.

PAINTING THE GRILLE:

1.The grille of the TCi Series speaker features an even, protective paint. This paint is an ideal primer.

2.Grilles must be spray painted. Do not use a brush and paint. Thick, brushed paint may clog the grille holes.

3.After removing the grille by carefully hooking it with a bent paper clip and pulling it gently away from the frame, remove the cloth scrim and spray on two thin coats of finish color. If you’re using a compressor and spray gun, use the finest, most diffuse setting. Be careful not to fill the holes in the grille with paint [figure 8].

4.When the paint is completely dry, reinstall scrim carefully, then reinstall the grille by fitting it into its recess so that it is just resting on the frame. Starting with one corner, go around the speaker and push the grille into the grille notch a little bit at a time. Be gentle; the grille may be easily bent out of shape by rough handling. You will feel a positive “snap” when it is fully in place.

FIGURE 8

Paint the grille. Use thin coats of spray paint.

Do not block grille holes with paint.

Pinte la rejilla. Aplique manos delgadas de pintura aerosol. No bloquee con pintura los agujeros de la rejilla.

Peinturez la grille. Appliquez des couches minces de peinture aérosol. N'obstruez pas les trous de la grille de peinture.

Streichen Sie den Gitteraufsatz. Verwenden Sie dazu dünne Spritzlackschichten. Die Öffnungen des Gitteraufsatzes dürfen nicht mit Farbe bzw. Lack blockiert werden.

PEINTURE DU CADRE:

1.Appliquez deux minces couches de peinture (ou plus) aux pièces non masquées. Il est recommandé de vaporiser le cadre de peinture [figure 7].

2.Lorsque la peinture est complètement sèche, retirez les cache-peinture.

PEINTURE DE LA GRILLE:

1.La grille des haut-parleurs de la Série TCi est enduite d’une peinture protectrice. Cette pein- ture constitue un apprêt idéal.

2.Les grilles doivent être vaporisées de peinture. N’utilisez pas de pinceau. La peinture plus épaisse appliquée au pinceau pourrait boucher les trous.

3.Après avoir dégagé la grille à l'aide d’un trombone plié et l’avoir retirée du cadre, retirez d’abord sa toile de revêtement intérieur puis vaporisez la grille de deux minces couches de peinture de finition. Si vous utilisez un com- presseur ou un pistolet pulvérisateur, chois- issez le réglage le plus fin, le plus diffus. Assurez-vous de ne pas boucher les trous

de la grille avec la peinture [figure 8] .

4.Lorsque la peinture est complètement sèche, replacez la toile à l’intérieur de la grille puis réin- stallez la grille en la posant d’abord délicatement sur le cadre. En commençant par un coin, pou- ssez petit à petit la grille dans son encoche tout autour du cadre. Soyez délicat, la grille peut être facilement déformée. Vous sentirez la grille «cliquer» en place.

FIGURE 9a

Round Template: Trace within the pop-out area.

Plantilla redonda: Marque dentro del área que se va a desechar.

Gabarit rond: Tracez à l'intérieur du gabarit.

Runde Vorlage: Umranden Sie den inneren, gestanzten Teil der Vorlage.

7Get more information and exclusive accessories, visit www.polkaudio.com

TC80I, TC65I, TC60I, TC265I specifications

Polk Audio has long been synonymous with high-quality audio equipment, and their in-ceiling speakers, the TC265i, TC60i, TC65i, and TC80i, continue this tradition of excellence. Each model is designed to deliver exceptional sound quality while seamlessly blending into your home environment.

The TC265i is a robust choice for those looking for a comprehensive audio experience. It features a 6.5-inch dynamic balance woofer, ensuring that low frequencies are reproduced with clarity and depth. The speaker is equipped with a 1-inch tweeter that provides crisp high-frequency sounds, making it perfect for both music and movie audio. With its Moisture Resistant materials, the TC265i is also ideal for use in bathrooms or kitchens, ensuring longevity in various environments.

Moving on to the TC60i, this model offers a more compact design while still delivering impressive sound. It features a 6.5-inch woofer and a 1-inch tweeter, providing a balanced sound profile that works well in smaller spaces. This model is particularly well-suited for home theater setups or as part of a multi-room audio system.

The TC65i takes things up a notch by combining aesthetic appeal with advanced audio technologies. It includes a 6.5-inch dynamic balance woofer and a 1-inch crisp tweeter, just like its predecessor, but boasts a more refined design. The Invisi-Ball swivel tweeter allows you to direct sound towards your listening area, enhancing soundstage and immersion.

Finally, the TC80i represents the pinnacle of Polk Audio's in-ceiling offerings. With an 8-inch woofer and a 1-inch tweeter, this model delivers deeper bass and more expansive sound. Its larger woofer makes it ideal for larger rooms or as part of a dedicated home theater system. The adjustable tweeter also aids in custom sound positioning, allowing users to tailor their audio experience to their specific needs.

All four models share a key characteristic: Polk Audio's exclusive Dynamic Balance technology, which minimizes distortion and produces accurate sound reproduction. The speakers also feature an easy-to-install design, with a paintable grille that allows homeowners to match their decor seamlessly. In summary, whether you opt for the TC265i, TC60i, TC65i, or TC80i, each model promises outstanding audio performance with advanced features and a commitment to quality. Their versatility makes them suitable for any home audio setup.

Polk Audio TC60I De la grille avec la peinture figure, Painting the Frame, Painting the Grille

Models: TC80I TC65I TC60I TC265I