Connect Cables and Stand
AC Power connection (Optional)
Use if Power over Ethernet
(PoE) is unavailable
NOTE: To ensure adequate support, the stand must be fully inserted into the slot on the back of the phone.
Features
Hookswitch
Reversible tab (For wallmount installation)
LCD Display
Soft key
Menu key
Speaker
In-Call Indicator
Back key
Security Lock
Navigation keys (Up, Down, Select)
Home key
Soft key
Speaker key
(Listen only; no microphone)
Mute key
Handset cord jack
Keypad | Volume Up/Down | Left Side View |
System Requirements
The following are the minimum software and hardware requirements:
•Ethernet connection
•Access to AC power or Power Over Ethernet (PoE)
•Network access to Microsoft® Lync™ Server 2010 or greater
Setup
Connect the Ethernet cable as shown above. Connect the AC power supply as shown above, if not powered via the Ethernet cable. Follow the instructions provided on the LCD display to sign in, configure and use the phone.
For more information, go to http://www.polycom.com/support/cx500, or contact your system administrator.
